|
|
|
Traction Tape Strip for Bluff Spring-Loa
OPTIONAL TRACTION TAPE FOR Bluff SPRING-LOADED ALUMINUM DOCK PLATES Optional Traction Tape offers additional slip-resistance and safety. Tape strips are sold individually; 36"L dock plate requires 5 strips and 48"L dock plate requires 6 strips.
|
|
|
|
MFG Part No#:
SLTAPE
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Kick Plate Cover SLKP-B for Bluff Spring
OPTIONAL KICK PLATE FOR Bluff SPRING-LOADED ALUMINUM DOCK PLATES Optional Kick Plate Cover offers foot and cart protection from mounting hardware. Sold individually (2 pieces are required per Dock Plate).
|
|
|
|
MFG Part No#:
SLKP-B
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Lifting Chains ACLC for Bluff Aluminum w
Attach the lifting chain to the curb of the dock board so it may be lifted with a fork truck, permitting easier handling of heavier boards. (Included with All-Steel Dock Boards.)
|
|
|
|
MFG Part No#:
ACLC
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff B4824 Heavy Duty Aluminum Dock Pla
Bluff HEAVY-DUTY ALUMINUM DOCK PLATE Lightweight aluminum dock plate has integral handle holes for easy lifting and a slip-resistant diamond tread surface. Beveled entry and exit edges, 11" apron and 11 degree crown angle offer a smooth transition between truck and dock. Safety stop, located on underside, helps secure the dock plate in position. Not for use with rider type trucks. Note that the width should be 12 inches wider than the load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2 HT". DIFFERENCE is the height difference above or below the dock.
|
|
|
|
MFG Part No#:
B4824
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Ez-Roll Attachment For Aluminum Do
This set of EZ-Roll attachments allow one person to transport and position their Bluff Dock Board without the use of a forklift. Telescopic handles fold down to the side of the Dock Board when not in use, safely out of the way. Note: This size is only for use with Bluff Aluminum Dock Boards with Steel Curbs. Works with Bluff models AC6060, BC6060, AC7260, BC7260. Dock Board sold separately.
|
|
|
|
MFG Part No#:
EZ47LR-PAIR
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Ez-Roll Attachment For Aluminum Do
This set of EZ-Roll attachments allow one person to transport and position their Bluff Dock Board without the use of a forklift. Telescopic handles fold down to the side of the Dock Board when not in use, safely out of the way. Note: This size is only for use with Bluff Aluminum Dock Boards with Steel Curbs. Works with Bluff models AC6048, BC6048, AC7248, BC7248. Dock Board sold separately.
|
|
|
|
MFG Part No#:
EZ40LR-PAIR
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
EZ-Roll Attachment for Bluff Aluminum Do
This attachment allows one person to lift and position Dock Board without the use of a forklift. Telescopic handles fold down to the side of the Dock Board when not in use, safely out of the way. Note: For use only with Bluff Aluminum Dock Boards with Steel Curbs.
|
|
|
|
MFG Part No#:
EZ35LR-PAIR
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff B4830 Heavy Duty Aluminum Dock Pla
Bluff HEAVY-DUTY ALUMINUM DOCK PLATE Lightweight aluminum dock plate has integral handle holes for easy lifting and a slip-resistant diamond tread surface. Beveled entry and exit edges, 11" apron and 11 degree crown angle offer a smooth transition between truck and dock. Safety stop, located on underside, helps secure dock plate in position. Not for use with rider type trucks. Note that the width should be 12 inches wider than the load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2 HT". DIFFERENCE is the height difference above or below the dock.
|
|
|
|
MFG Part No#:
B4830
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff A4848 Heavy Duty Aluminum Dock Pla
Bluff HEAVY-DUTY ALUMINUM DOCK PLATE Lightweight aluminum dock plate has integral handle holes for easy lifting and a slip-resistant diamond tread surface. Beveled entry and exit edges, 11" apron and 11 degree crown angle offer a smooth transition between truck and dock. Safety stop, located on underside, helps secure the dock plate in position. Not for use with rider type trucks. Note that the width should be 12 inches wider than the load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2 HT". DIFFERENCE is the height difference above or below the dock.
|
|
|
|
MFG Part No#:
A4848
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Ez-Roll Attachment For Aluminum Do
This set of EZ-Roll attachments allow one person to transport and position their Bluff Dock Board without the use of a forklift. Telescopic handles fold down to the side of the Dock Board when not in use, safely out of the way. Note: This size is only for use with Bluff Aluminum Dock Boards with Steel Curbs. Works with Bluff models AC6072, BC6072. Dock Board sold separately.
|
|
|
|
MFG Part No#:
EZ52LR-PAIR
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Spring-Loaded Aluminum Dock Plate,
Bluff SPRING-LOADED ALUMINUM DOCK PLATE Designed for Docks where Hand Trucks are used to Load Trucks & Vans. This dock plate is recommended for use at the docks of beverage and baked good distributors, snack, sundry and paper suppliers. Folding dock plate is ideal for docks where non-powered hand trucks, platform trucks and dollies need to get into and out of trucks easily. Platform is mounted on the top of the dock and offers dual-spring lift assist for easy vertical storage. Slip-resistant aluminum treadplate construction and machine beveled deck edges for safety. Installs easily (hardware not included). Manufactured and tested in compliance with ANSI Standard MH30.2. Note: Worksheet will be sent for approval before manufacturing begins, as some dock/truck combinations require special bends and springs.
|
|
|
|
MFG Part No#:
SL4836
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff SL3648 Spring-Loaded Aluminum Dock
Bluff SPRING-LOADED ALUMINUM DOCK PLATE Designed for Docks where Hand Trucks are used to Load Trucks & Vans. This dock plate is recommended for use at the docks of beverage and baked good distributors, snack, sundry and paper suppliers. Folding dock plate is ideal for docks where non-powered hand trucks, platform trucks and dollies need to get into and out of trucks easily. Platform is mounted on the top of the dock and offers dual-spring lift assist for easy vertical storage. Slip-resistant aluminum treadplate construction and machine beveled deck edges for safety. Installs easily (hardware not included). Manufactured and tested in compliance with ANSI Standard MH30.2. Note: Worksheet will be sent for approval before manufacturing begins, as some dock/truck combinations require special bends and springs.
|
|
|
|
MFG Part No#:
SL3648
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff AWC3648 Gas Cylinder Plate with Cu
Bluff GAS CYLINDER PALLET RAMP PLATE Easily move Industrial, Medical and Specialty Gas Cylinders On and Off Pallets. Steel pallets are used in the gas cylinder distribution process to hold both filled and depleted cylinders. This unique plate provides an excellent transition surface for maneuvering cylinders with ease and control, significantly reducing cylinder damage and the risk of employee injury. 3/8" thick aluminum diamond plate construction is strong enough to accommodate heavy cylinders, yet lightweight for easy hand placement and portability. ANSI code and weight capacity is stamped onto the back of each plate. Note: not for use with powered vehicles. Plate with Curbs features 4"H run-off curbs on both sides for added cylinder control. Plate surface is 9"H and has an 11" entry lip for a smooth transition. Plate features hand-hole cutouts on the curbs for easy portability and bolt-on safety legs.
|
|
|
|
MFG Part No#:
AWC3648
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff B4848 Heavy Duty Aluminum Dock Pla
Bluff HEAVY-DUTY ALUMINUM DOCK PLATE Lightweight aluminum dock plate has integral handle holes for easy lifting and a slip-resistant diamond tread surface. Beveled entry and exit edges, 11" apron and 11 degree crown angle offer a smooth transition between truck and dock. Safety stop, located on underside, helps secure the dock plate in position. Not for use with rider type trucks. Note that the width should be 12 inches wider than the load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2 HT". DIFFERENCE is the height difference above or below the dock.
|
|
|
|
MFG Part No#:
B4848
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff B6036 Heavy Duty Aluminum Dock Pla
Bluff HEAVY-DUTY ALUMINUM DOCK PLATE Lightweight aluminum dock plate has integral handle holes for easy lifting and a slip-resistant diamond tread surface. Beveled entry and exit edges, 11" apron and 11 degree crown angle offer a smooth transition between truck and dock. Safety stop, located on underside, helps secure dockplate in position. Not for use with rider type trucks. Note that the width should be 12 inches wider than the load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2
|
|
|
|
MFG Part No#:
B6036
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff AC7236 Aluminum Dock Board with St
Bluff ALUMINUM DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Combines the strength of steel with the light weight of aluminum Resilient aluminum alloy dock board has positive traction surface. Bolted-on steel curbs offer excellent impact resistance to help prevent run-off. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11-degrees angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A). NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 5" Above Dock with Propane or Gas ForkliftUp to 3" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
AC7236
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff A6060 Heavy Duty Aluminum Dock Pla
Bluff HEAVY-DUTY ALUMINUM DOCK PLATE Lightweight aluminum dock plate has integral handle holes for easy lifting and a slip-resistant diamond tread surface. Beveled entry and exit edges, 11" apron and 11 degree crown angle offer a smooth transition between truck and dock. Safety stop, located on underside, helps secure the dock plate in position. Not for use with rider type trucks. Note that the width should be 12 inches wider than the load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2 HT". DIFFERENCE is the height difference above or below the dock.
|
|
|
|
MFG Part No#:
A6060
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SC6048 Steel Dock Board with Ste
Bluff STEEL DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Heavy-duty all-welded steel is ideal for frequent motorized traffic. Maximum impact resistance, strength and safety. Comes with lifting chains. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11° angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A).NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 7" Above Dock with Propane or Gas ForkliftUp to 5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SC6048
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff B6048 Heavy Duty Aluminum Dock Pla
Bluff HEAVY-DUTY ALUMINUM DOCK PLATE Lightweight aluminum dock plate has integral handle holes for easy lifting and a slip-resistant diamond tread surface. Beveled entry and exit edges, 11" apron and 11 degree crown angle offer a smooth transition between truck and dock. Safety stop, located on underside, helps secure the dock plate in position. Not for use with rider type trucks. Note that the width should be 12 inches wider than the load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2 HT". DIFFERENCE is the height difference above or below the dock.
|
|
|
|
MFG Part No#:
B6048
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff AWC3630 Gas Cylinder Plate with Cu
Bluff GAS CYLINDER PALLET RAMP PLATE Easily move Industrial, Medical and Specialty Gas Cylinders On and Off Pallets. Steel pallets are used in the gas cylinder distribution process to hold both filled and depleted cylinders. This unique plate provides an excellent transition surface for maneuvering cylinders with ease and control, significantly reducing cylinder damage and the risk of employee injury. 3/8" thick aluminum diamond plate construction is strong enough to accommodate heavy cylinders, yet lightweight for easy hand placement and portability. ANSI code and weight capacity is stamped onto the back of each plate. Note: not for use with powered vehicles. Plate with Curbs features 4"H run-off curbs on both sides for added cylinder control. Plate surface is 9"H and has an 11" entry lip for a smooth transition. Plate features hand-hole cutouts on the curbs for easy portability and bolt-on safety legs.
|
|
|
|
MFG Part No#:
AWC3630
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|