|
|
|
|
|
|
|
|
|
|
Sort By:
|
|
|
|
Bluff SL3048 Spring-Loaded Aluminum Dock
Bluff SPRING-LOADED ALUMINUM DOCK PLATE Designed for Docks where Hand Trucks are used to Load Trucks & Vans. This dock plate is recommended for use at the docks of beverage and baked good distributors, snack, sundry and paper suppliers. Folding dock plate is ideal for docks where non-powered hand trucks, platform trucks and dollies need to get into and out of trucks easily. Platform is mounted on the top of the dock and offers dual-spring lift assist for easy vertical storage. Slip-resistant aluminum treadplate construction and machine beveled deck edges for safety. Installs easily (hardware not included). Manufactured and tested in compliance with ANSI Standard MH30.2. Note: Worksheet will be sent for approval before manufacturing begins, as some dock/truck combinations require special bends and springs.
|
|
|
|
MFG Part No#:
SL3048
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SB6048 Speedy Board Dock Board 6
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.10,000 Lb. Capacity Dock Board features an 11° bend on the truck end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 7" Above Dock with Propane or Gas ForkliftUp to 5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SB6048
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff SL4848 Spring-Loaded Aluminum Dock
Bluff SPRING-LOADED ALUMINUM DOCK PLATE Designed for Docks where Hand Trucks are used to Load Trucks & Vans. This dock plate is recommended for use at the docks of beverage and baked good distributors, snack, sundry and paper suppliers. Folding dock plate is ideal for docks where non-powered hand trucks, platform trucks and dollies need to get into and out of trucks easily. Platform is mounted on the top of the dock and offers dual-spring lift assist for easy vertical storage. Slip-resistant aluminum treadplate construction and machine beveled deck edges for safety. Installs easily (hardware not included). Manufactured and tested in compliance with ANSI Standard MH30.2. Note: Worksheet will be sent for approval before manufacturing begins, as some dock/truck combinations require special bends and springs.
|
|
|
|
MFG Part No#:
SL4848
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff B4860 Heavy Duty Aluminum Dock Pla
Bluff HEAVY-DUTY ALUMINUM DOCK PLATE Lightweight aluminum dock plate has integral handle holes for easy lifting and a slip-resistant diamond tread surface. Beveled entry and exit edges, 11" apron and 11 degree crown angle offer a smooth transition between truck and dock. Safety stop, located on underside, helps secure dockplate in position. Not for use with rider type trucks. Note that the width should be 12 inches wider than the load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2
|
|
|
|
MFG Part No#:
B4860
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Speedy Board Aluminum Dock Board,
Bluff Speedy Board ALUMINUM DOCK BOARD WITH WELDED ALUMINUM CURBS & FORKLIFT TINE NOTCHESLightweight Dock Boards offer easier placement and retrieval.This all-welded aluminum dock board is ideal for low-to-medium volume dock applications using a pallet jack or a forklift. Heavy duty aluminum treadplate dock board features fully welded extruded aluminum curbs and safety restraint legs for maximum corrosion resistance and controlled spark production. Beveled ends offer smooth entry/exit and board includes an 11° bend and an 11" lip on the truck end (customizations are available; call for more information). Each Speedy Board includes integral Fork Cut-outs for quick, safe placement with a forklift. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 5" Above Dock with Propane or Gas ForkliftUp to 3" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10ATD6036
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SB7248 Speedy Board Dock Board 7
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.10,000 Lb. Capacity Dock Board features an 11° bend on the truck end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 7" Above Dock with Propane or Gas ForkliftUp to 5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SB7248
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff AWC3660 Gas Cylinder Plate with Cu
Bluff GAS CYLINDER PALLET RAMP PLATE Easily move Industrial, Medical and Specialty Gas Cylinders On and Off Pallets. Steel pallets are used in the gas cylinder distribution process to hold both filled and depleted cylinders. This unique plate provides an excellent transition surface for maneuvering cylinders with ease and control, significantly reducing cylinder damage and the risk of employee injury. 3/8" thick aluminum diamond plate construction is strong enough to accommodate heavy cylinders, yet lightweight for easy hand placement and portability. ANSI code and weight capacity is stamped onto the back of each plate. Note: not for use with powered vehicles. Plate with Curbs features 4"H run-off curbs on both sides for added cylinder control. Plate surface is 9"H and has an 11" entry lip for a smooth transition. Plate features hand-hole cutouts on the curbs for easy portability and bolt-on safety legs.
|
|
|
|
MFG Part No#:
AWC3660
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SC6060 Steel Dock Board with Ste
Bluff STEEL DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Heavy-duty all-welded steel is ideal for frequent motorized traffic. Maximum impact resistance, strength and safety. Comes with lifting chains. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11° angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A).NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 9" Above Dock with Propane or Gas ForkliftUp to 7" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SC6060
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Speedy Board Aluminum Dock Board,
Bluff Speedy Board ALUMINUM DOCK BOARD WITH WELDED ALUMINUM CURBS & FORKLIFT TINE NOTCHESLightweight Dock Boards offer easier placement and retrieval.This all-welded aluminum dock board is ideal for low-to-medium volume dock applications using a pallet jack or a forklift. Heavy duty aluminum treadplate dock board features fully welded extruded aluminum curbs and safety restraint legs for maximum corrosion resistance and controlled spark production. Beveled ends offer smooth entry/exit and board includes an 11° bend and an 11" lip on the truck end (customizations are available; call for more information). Each Speedy Board includes integral Fork Cut-outs for quick, safe placement with a forklift. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 4" Above Dock with Propane or Gas ForkliftUp to 2" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15ATD6030
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Speedy Board Aluminum Dock Board,
Bluff Speedy Board ALUMINUM DOCK BOARD WITH WELDED ALUMINUM CURBS & FORKLIFT TINE NOTCHESLightweight Dock Boards offer easier placement and retrieval.This all-welded aluminum dock board is ideal for low-to-medium volume dock applications using a pallet jack or a forklift. Heavy duty aluminum treadplate dock board features fully welded extruded aluminum curbs and safety restraint legs for maximum corrosion resistance and controlled spark production. Beveled ends offer smooth entry/exit and board includes an 11° bend and an 11" lip on the truck end (customizations are available; call for more information). Each Speedy Board includes integral Fork Cut-outs for quick, safe placement with a forklift. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 5" Above Dock with Propane or Gas ForkliftUp to 3" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15ATD7236
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff BC7236 Aluminum Dock Board with St
Bluff ALUMINUM DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Combines the strength of steel with the light weight of aluminum Resilient aluminum alloy dock board has positive traction surface. Bolted-on steel curbs offer excellent impact resistance to help prevent run-off. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11-degrees angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A). NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 5" Above Dock with Propane or Gas ForkliftUp to 3" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
BC7236
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SC7236 Steel Dock Board with Ste
Bluff STEEL DOCK BOARD WITH STEEL CURBSSpeed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Heavy-duty all-welded steel is ideal for frequent motorized traffic. Maximum impact resistance, strength and safety. Comes with lifting chains. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11° angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A).NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 5" Above Dock with Propane or Gas ForkliftUp to 3" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SC7236
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SC6072 Steel Dock Board with Ste
Bluff STEEL DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Heavy-duty all-welded steel is ideal for frequent motorized traffic. Maximum impact resistance, strength and safety. Comes with lifting chains. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11° angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A).NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 11" Above Dock with Propane or Gas ForkliftUp to 8.5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SC6072
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20SB6036 Speedy Board Dock Board 6
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.20,000 Lb. Capacity Dock Board has a 7° bend 17½" from the truck end and a 9° bend 8" from the dock end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 5" Above Dock with Propane or Gas ForkliftUp to 3" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20SB6036
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff BC7248 Aluminum Dock Board with St
Bluff ALUMINUM DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Combines the strength of steel with the light weight of aluminum Resilient aluminum alloy dock board has positive traction surface. Bolted-on steel curbs offer excellent impact resistance to help prevent run-off. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11-degrees angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A). NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 7" Above Dock with Propane or Gas ForkliftUp to 5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
BC7248
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15TFL6036 Steel Dock Board with St
Bluff STEEL DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Heavy-duty all-welded steel is ideal for frequent motorized traffic. Maximum impact resistance, strength and safety. Comes with built-in lifting loops. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11° angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A). NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity. WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 5" Above Dock with Propane or Gas ForkliftUp to 3" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15TFL6036
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff AC7248 Aluminum Dock Board with St
Bluff ALUMINUM DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Combines the strength of steel with the light weight of aluminum Resilient aluminum alloy dock board has positive traction surface. Bolted-on steel curbs offer excellent impact resistance to help prevent run-off. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11-degrees angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A). NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 7" Above Dock with Propane or Gas ForkliftUp to 5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
AC7248
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SB6072 Speedy Board Dock Board 6
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.10,000 Lb. Capacity Dock Board features an 11° bend on the truck end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 11" Above Dock with Propane or Gas ForkliftUp to 8.5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SB6072
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15SB7248 Speedy Board Dock Board 7
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.15,000 Lb. Capacity Dock Board has a 7° bend 17½" from the truck end and a 9° bend 8" from the dock end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 7" Above Dock with Propane or Gas ForkliftUp to 5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15SB7248
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SB6060 Speedy Board Dock Board 6
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.10,000 Lb. Capacity Dock Board features an 11° bend on the truck end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 9" Above Dock with Propane or Gas ForkliftUp to 7" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SB6060
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
|
|
|