|
|
|
Beta 142 24mm 12-Point Reversible Ratche
The 142 series of wrenches have one open end (15° angle) and a 12-point box end (15° offset) with a toggle-reversing ratchet mechanism. Both ends fit the same size metric (mm) fasteners. The high-polish, chrome-plated finish easily wipes clean after use. The Beta logo and series number are stamped in the center of the handle, and the size is stamped at each end of the handle. This wrench fits fasteners with a 24mm hex.
|
|
|
|
MFG Part No#:
1420024
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 42INOX 3/4" 12-Point 15° Offset Com
The Beta 42INOX series of stainless steel combination wrenches feature a 15-degree offset open end and 15-degree offset 12-point box end allowing for a greater range of movement and leverage in tight spaces. Made in Italy with AISI 420 Stainless Steel to prevent corrosion and rust, these combination wrenches are durable for any application, and especially ideal for use in the food industry and clean rooms. The length of these combination wrenches are longer than most competitors allowing for greater torque to be obtained. These combination wrenches are manufactured in Italy with state-of-the-art automation technology.
|
|
|
|
MFG Part No#:
420369
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 142AS 3/4" 12-Point Reversible Ratc
The 142AS series of wrenches from Beta Tools have one open end (15° angle) and a 12-point box end (15° offset) with a toggle-reversing ratchet mechanism. Both ends fit the same size SAE (inch) fasteners. The high-polish, chrome-plated finish looks great and wipes clean easily after use. The Beta logo and series of number are stamped in the center of the handle, and the fractional size is stamped at each end of the handle.
|
|
|
|
MFG Part No#:
1420319
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 142SN 19mm 12-Point Ratcheting Comb
The 142SN series of ratcheting combination wrenches have one open end with a 15° angle from the handle. The other end has a one-way ratcheting 12-point box end with a swivel joint. Both ends fit the same size metric (mm) fastener. The joint allows the handle point anywhere from 90 to 0 degrees to the axis of the fastener in either direction. This wrench fits fasteners with a 19mm hex and measures 250mm long overall. The open end measures 40.2mm wide x 9mm thick. The ratcheting box end measures 34.8mm OD x 11.5mm thick.
|
|
|
|
MFG Part No#:
1420219
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 142 18mm 12-Point Reversible Ratche
The 142 series of wrenches have one open end (15° angle) and a 12-point box end (15° offset) with a toggle-reversing ratchet mechanism. Both ends fit the same size metric (mm) fasteners. The high-polish, chrome-plated finish easily wipes clean after use. The Beta logo and series number are stamped in the center of the handle, and the size is stamped at each end of the handle. This wrench fits fasteners with a 18mm hex.
|
|
|
|
MFG Part No#:
1420018
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 42INOX 11/16" 12-Point 15° Offset C
The Beta 42INOX series of stainless steel combination wrenches feature a 15-degree offset open end and 15-degree offset 12-point box end allowing for a greater range of movement and leverage in tight spaces. Made in Italy with AISI 420 Stainless Steel to prevent corrosion and rust, these combination wrenches are durable for any application, and especially ideal for use in the food industry and clean rooms. The length of these combination wrenches are longer than most competitors allowing for greater torque to be obtained. These combination wrenches are manufactured in Italy with state-of-the-art automation technology.
|
|
|
|
MFG Part No#:
420367
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 142SN 22mm 12-Point Ratcheting Comb
The 142SN series of ratcheting combination wrenches have one open end with a 15° angle from the handle. The other end has a one-way ratcheting 12-point box end with a swivel joint. Both ends fit the same size metric (mm) fastener. The joint allows the handle point anywhere from 90 to 0 degrees to the axis of the fastener in either direction. This wrench fits fasteners with a 22mm hex and measures 285mm long overall. The open end measures 46.5mm wide x 10.7mm thick. The ratcheting box end measures 42.4mm OD x 14mm thick.
|
|
|
|
MFG Part No#:
1420222
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 42INOX 7/8" 12-Point 15° Offset Com
The Beta 42INOX series of stainless steel combination wrenches feature a 15-degree offset open end and 15-degree offset 12-point box end allowing for a greater range of movement and leverage in tight spaces. Made in Italy with AISI 420 Stainless Steel to prevent corrosion and rust, these combination wrenches are durable for any application, and especially ideal for use in the food industry and clean rooms. The length of these combination wrenches are longer than most competitors allowing for greater torque to be obtained. These combination wrenches are manufactured in Italy with state-of-the-art automation technology.
|
|
|
|
MFG Part No#:
420372
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 142 27mm 12-Point Reversible Ratche
The 142 series of wrenches have one open end (15° angle) and a 12-point box end (15° offset) with a toggle-reversing ratchet mechanism. Both ends fit the same size metric (mm) fasteners. The high-polish, chrome-plated finish easily wipes clean after use. The Beta logo and series number are stamped in the center of the handle, and the size is stamped at each end of the handle. This wrench fits fasteners with a 27mm hex.
|
|
|
|
MFG Part No#:
1420027
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 900/55Z 52 Tooth Reversible Ratchet
The 900/58 ratchet handle from Beta Tools not only works as a standard ratchet driver, by swinging the handle back and forth to loosen or tighten, but when you're in a tight spot, just rotate the bi-material handle instead of swinging it. The handle turns a full 360 degrees, turning the 1/4" square drive as it goes. The 52-tooth count ratchet mechanism requires just 7 degrees of take-up for use in confined spaces. Turning the handle drives the head through the ratchet, allowing you to use just a partial twist at a time instead of spinning it all the way around. The ratchet head has a reversing ring for fingertip control and accepts any 1/4" square drive socket or accessory. A socket release button on the back of the head ensures that your socket stays on until you want it to come off.
|
|
|
|
MFG Part No#:
9000884
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Gearwrench 90 Tooth & 12 Point Metric Co
THE GEARWRENCH 90-TOOTH RATCHETING WRENCH SWING ARC OF JUST 4° TURNS FASTENERS IN EXTREMELY TIGHT SPACES. LONGER WIDER BEAM DELIVERS IMPROVED REACH LEVERAGE AND COMFORT. LARGE COLOR-CODED SAE/METRIC MARKINGS MAKE SIZE IDENTIFICATION EASY. ALL EXCEED ASME PERFORMANCE SPECS AND COME WITH THE TRUSTED GEARWRENCH LIMITED LIFETIME WARRANTY. FEATURES 90-TOOTH RATCHETING BOX END DELIVERS A 4° SWING ARC TO TURN A FASTENER IN TIGHT SPACES THE FLEXIBLE HEAD PROVIDES ACCESS TO HARD-TO-REACH BOLTS AND FASTENERS OFF-CORNER LOADING DESIGN ON BOX END PROVIDES BETTER GRIP AND REDUCES FASTENER ROUNDING DUAL-DIRECTION OFF-CORNER LOADING ON OPEN-END REDUCES FASTENER ROUNDING 12 POINT RATCHETING BOX-END FOR USE ON 6 OR 12 POINT FASTENERS LONGER WIDER BEAM FOR IMPROVED REACH LEVERAGE AND COMFORT LARGE COLOR-CODED MARKINGS FOR EASY SIZE ID BRIGHT FULL POLISH CHROME FINISH EASILY WIPES CLEAN AND RESISTS CORROSION/LI EXCEEDS ASME TORQUE PERFORMANCE REQUIREMENTS INCLUDES SOLVENT RESISTANT COMPACT RACK WITH A DROP IN WRENCH PLACEMENT FOR STORAGE AND ORGANIZATION
|
|
|
|
MFG Part No#:
86927
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Gearwrench 90 Tooth & 12 Point SAE Combi
THE GEARWRENCH 90-TOOTH RATCHETING WRENCH SWING ARC OF JUST 4° TURNS FASTENERS IN EXTREMELY TIGHT SPACES. LONGER WIDER BEAM DELIVERS IMPROVED REACH LEVERAGE AND COMFORT. LARGE COLOR-CODED SAE/METRIC MARKINGS MAKE SIZE IDENTIFICATION EASY. ALL EXCEED ASME PERFORMANCE SPECS AND COME WITH THE TRUSTED GEARWRENCH LIMITED LIFETIME WARRANTY. FEATURES 90-TOOTH RATCHETING BOX END DELIVERS A 4° SWING ARC TO TURN A FASTENER IN TIGHT SPACES THE FLEXIBLE HEAD PROVIDES ACCESS TO HARD-TO-REACH BOLTS AND FASTENERS OFF-CORNER LOADING DESIGN ON BOX END PROVIDES BETTER GRIP AND REDUCES FASTENER ROUNDING DUAL-DIRECTION OFF-CORNER LOADING ON OPEN-END REDUCES FASTENER ROUNDING 12 POINT RATCHETING BOX-END FOR USE ON 6 OR 12 POINT FASTENERS LONGER WIDER BEAM FOR IMPROVED REACH LEVERAGE AND COMFORT LARGE COLOR-CODED MARKINGS FOR EASY SIZE ID BRIGHT FULL POLISH CHROME FINISH EASILY WIPES CLEAN AND RESISTS CORROSION/LI EXCEEDS ASME TORQUE PERFORMANCE REQUIREMENTS INCLUDES SOLVENT RESISTANT COMPACT RACK WITH A DROP IN WRENCH PLACEMENT FOR STORAGE AND ORGANIZATION
|
|
|
|
MFG Part No#:
86959
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Beta 142AS 8 Piece 5/16" to 3/4" 12-Poin
The 142AS series of wrenches from Beta Tools have one open end (15° angle) and a 12-point box end (15° offset) with a toggle-reversing ratchet mechanism. Both ends fit the same size SAE (inch) fasteners. The high-polish, chrome-plated finish looks great and wipes clean easily after use. The Beta logo and series of number are stamped in the center of the handle, and the fractional size is stamped at each end of the handle.
|
|
|
|
MFG Part No#:
1420330
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 42INOX 11 Piece 6mm to 19mm 12-Poin
Designed and manufactured in Italy with stainless steel to prevent corrosion and rust, the INOX combination wrench is durable for any application. The wrench features one open end (15° angle) and one offset (15° angle) 12, point box end allowing for a greater range of movement and leverage in tight spaces. This 11-piece metric set includes sizes 6, 8, 10, 11, 12, 13, 14, 15, 16, 17, 19 mm.
|
|
|
|
MFG Part No#:
420391
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Beta 42 26 Piece 6mm to 32mm 12-Point 15
The 42 series of combination wrenches have one open end and one offset 12-point box end. Both ends of this wrench fit metric fasteners with a 32mm hex head (the box end will also fit fasteners with a 12-point head). The tough, textured finish and ribbed channel handle provides a firm grip and hides scratches. The thin profile head allows for access in tight spaces and a 15-degree offset box end and open end provides easier clearance around obstructions. Made in Italy with high-strength, forged & tempered chrome-plated alloy steel. This 26-piece metric set includes sizes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32 mm.
|
|
|
|
MFG Part No#:
421070
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|