|
|
|
|
|
|
|
|
|
|
Sort By:
|
|
|
|
RUD Powerpoint Hoist Ring, 360 Pivot, 55
Direct VIP-chain connection. Double ball-bearings is the optimal solution for turning and flipping operations under full load. Lifting points rotates 360 degrees. Large distance between bolt-on surface and load to avoid damage. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Suspension ring with enlarged pivoting area. Available in Metric and UNC thread. Maximum operation temperature range WITHOUT reduction of WLL-40 to 200 Celsius. Maximum operation temperature WITH reduction of WLL up to 400 degrees Celsius.
|
|
|
|
MFG Part No#:
7989922
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
CM Weblok Assembly 867025-2 Synthetic to
CM Weblok Assembly 867025-2 Synthetic to Attachment 3/4" 18750 Lbs CapacityWhen working with synthetic slings, CM Weblok assemblies allow for quick, easy and safe sling attachment. CM Webloks are available in two designs. Synthetic-to-attachment Webloks combine our industry-leading CM Hammerlok coupling link with a CM synthetic sling attachment. Synthetic-to-synthetic Webloks feature two synthetic sling attachments. CM Webloks are available with either single or double load pin retention, depending on your application. For use with round slings, web slings and high-performance synthetics. Simply connect a sling to the synthetic sling attachment of the Weblok and a master link or other rigging attachment to the Hammerlok portion to efficiently and safely lift your load. For synthetic-to-synthetic Webloks, simply attach a sling to both ends. Forged rigging products are better than cast rigging products. When compared, forged parts feature greater ductility, better fatigue life, higher tensile strength and have a finer grain structure. This combination of enhanced features allows for lighter, better performing products with a lower risk of internal defects. Synthetic sling attachment portions of the CM Weblok feature the widely recognized CM orange powder coated finish, providing an extra-smooth surface for synthetic attachments. Buy with confidence knowing your product is safe to operate and meets industry-recognized overhead lifting standards.Available with either single or double retention. Webloks with double retention feature a load pin retention system that incorporates a bolt head and lock nut to prevent the load pin from backing out during extreme use - delivering the highest level of safety on the market. For less severe applications, single-retention Webloks use the same retention system as CM's legendary Hammerlok.
|
|
|
|
MFG Part No#:
867025-2
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Hoist Ring, 180 Pivot, 2860 lb. Load
Ball bearing for shock-free rotating and turning with less friction. Lifting points pivots 360 degrees. Suspension ring with enlarged pivoting area. Available as Metric or UNC Thread. Clear marking of the minimum WLL for all loading directions. Patented markings for easy determination for withdraw of service as well as the determination of the load angle. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Variable bolt lengths available for tapped or through holes. Non-removable special bolt. Large distance between bolt-on surface and load to avoid damage. Maximum operation temperature range WITHOUT reduction of WLL -40 to 100 degree Celsius. Maximum operation temperature WITH reduction of WLL 350 degree Celsius.
|
|
|
|
MFG Part No#:
7991093
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Weld-On Excavator Hook, 5700 lb. Loa
The threaded hook for all lifting means. Robust, forged safety hook. Assembly with flat/ring wrench or allen key possible. Area of application in hook plane: 150 degrees. Areas of application at lateral load: +45, -45 degrees. Maximum operation temperature range WITHOUT reduction of WLL -40 to 100 degree Celsius. Maximum operation temperature WITH reduction of WLL to 350 degree Celsius.
|
|
|
|
MFG Part No#:
7991209
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Weld-On Excavator Hook, 8800 lb. Loa
The weldable hook for all lifting means. Robust, forged safety latch. Phosphated surface. Weld-on point can be used as excavator hook. Simple and fast welding installation. Area of application in hook plane: 150 degrees. Area of application at lateral load: +45, -45 degrees. Maximum operation temperature range WITHOUT reduction of WLL -40 degree to 200 degree Celsius. Maximum operation temperature WITH reduction of will 400 degree Celsius.
|
|
|
|
MFG Part No#:
7991210
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Powerpoint Hoist Ring, 180 Pivot, 13
Universal hook connection for ring assemblies, round slings, wire ropes, hook assemblies. Double ball-bearings is the optimal solution for turning and flipping operations under full load. Lifting points rotates 360 degrees. Large distance between bolt-on surface and load to avoid damage. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Suspension ring with enlarged pivoting area. Available in Metric and UNC thread. Maximum operation temperature range WITHOUT reduction of WLL-40 to 200 Celsius. Maximum operation temperature WITH reduction of WLL up to 400 degrees Celsius.
|
|
|
|
MFG Part No#:
7990719
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Powerpoint Hoist Ring, 180 Pivot, 33
Universal hook connection for ring assemblies, round slings, wire ropes, hook assemblies. Double ball-bearings is the optimal solution for turning and flipping operations under full load. Lifting points rotates 360 degrees. Large distance between bolt-on surface and load to avoid damage. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Suspension ring with enlarged pivoting area. Available in Metric and UNC thread. Maximum operation temperature range WITHOUT reduction of WLL-40 to 200 Celsius. Maximum operation temperature WITH reduction of WLL up to 400 degrees Celsius.
|
|
|
|
MFG Part No#:
7989719
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Powerpoint Hoist Ring, 180 Pivot, 55
Universal hook connection for ring assemblies, round slings, wire ropes, hook assemblies. Double ball-bearings is the optimal solution for turning and flipping operations under full load. Lifting points rotates 360 degrees. Large distance between bolt-on surface and load to avoid damage. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Suspension ring with enlarged pivoting area. Available in Metric and UNC thread. Maximum operation temperature range WITHOUT reduction of WLL-40 to 200 Celsius. Maximum operation temperature WITH reduction of WLL up to 400 degrees Celsius.
|
|
|
|
MFG Part No#:
7989075
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
CM Weblok Assembly 877010-4 Synthetic to
CM Weblok Assembly 877010-4 Synthetic to Synthetic 3/8" 5000 Lbs CapacityWhen working with synthetic slings, CM Weblok assemblies allow for quick, easy and safe sling attachment. CM Webloks are available in two designs. Synthetic-to-attachment Webloks combine our industry-leading CM Hammerlok coupling link with a CM synthetic sling attachment. Synthetic-to-synthetic Webloks feature two synthetic sling attachments. CM Webloks are available with either single or double load pin retention, depending on your application. For use with round slings, web slings and high-performance synthetics. Simply connect a sling to the synthetic sling attachment of the Weblok and a master link or other rigging attachment to the Hammerlok portion to efficiently and safely lift your load. For synthetic-to-synthetic Webloks, simply attach a sling to both ends. Forged rigging products are better than cast rigging products. When compared, forged parts feature greater ductility, better fatigue life, higher tensile strength and have a finer grain structure. This combination of enhanced features allows for lighter, better performing products with a lower risk of internal defects. Synthetic sling attachment portions of the CM Weblok feature the widely recognized CM orange powder coated finish, providing an extra-smooth surface for synthetic attachments. Buy with confidence knowing your product is safe to operate and meets industry-recognized overhead lifting standards.Available with either single or double retention. Webloks with double retention feature a load pin retention system that incorporates a bolt head and lock nut to prevent the load pin from backing out during extreme use - delivering the highest level of safety on the market. For less severe applications, single-retention Webloks use the same retention system as CM's legendary Hammerlok.
|
|
|
|
MFG Part No#:
877010-4
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
CM Weblok Assembly 867025-4 Synthetic to
CM Weblok Assembly 867025-4 Synthetic to Attachment 3/4" 18750 Lbs CapacityWhen working with synthetic slings, CM Weblok assemblies allow for quick, easy and safe sling attachment. CM Webloks are available in two designs. Synthetic-to-attachment Webloks combine our industry-leading CM Hammerlok coupling link with a CM synthetic sling attachment. Synthetic-to-synthetic Webloks feature two synthetic sling attachments. CM Webloks are available with either single or double load pin retention, depending on your application. For use with round slings, web slings and high-performance synthetics. Simply connect a sling to the synthetic sling attachment of the Weblok and a master link or other rigging attachment to the Hammerlok portion to efficiently and safely lift your load. For synthetic-to-synthetic Webloks, simply attach a sling to both ends. Forged rigging products are better than cast rigging products. When compared, forged parts feature greater ductility, better fatigue life, higher tensile strength and have a finer grain structure. This combination of enhanced features allows for lighter, better performing products with a lower risk of internal defects. Synthetic sling attachment portions of the CM Weblok feature the widely recognized CM orange powder coated finish, providing an extra-smooth surface for synthetic attachments. Buy with confidence knowing your product is safe to operate and meets industry-recognized overhead lifting standards.Available with either single or double retention. Webloks with double retention feature a load pin retention system that incorporates a bolt head and lock nut to prevent the load pin from backing out during extreme use - delivering the highest level of safety on the market. For less severe applications, single-retention Webloks use the same retention system as CM's legendary Hammerlok.
|
|
|
|
MFG Part No#:
867025-4
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD 4 Ton, M20, Pivot, Swivel Load Ring
Lifting points rotates 360 degrees. Pivoting 180 degrees. Unique RUD spring mechanism. Swivel joint in the lifting ring axis. Round lifting ring (no kinking possible). Rotating combination head with RUD ICE-Bolt. Wear indicators. Unsymmetrical application of force. Available in Metric or UNC thread. Maximum operation temperature range WITHOUT reduction of WLL -40 to 100 degree Celsius. MAximum operation temperature WITH reduction of WLL 350 degree Celsius.
|
|
|
|
MFG Part No#:
7909317
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Powerpoint Hoist Ring, 360 Pivot, 88
Direct VIP-chain connection. Double ball-bearings is the optimal solution for turning and flipping operations under full load. Lifting points rotates 360 degrees. Large distance between bolt-on surface and load to avoid damage. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Suspension ring with enlarged pivoting area. Available in Metric and UNC thread. Maximum operation temperature range WITHOUT reduction of WLL-40 to 200 Celsius. Maximum operation temperature WITH reduction of WLL up to 400 degrees Celsius.
|
|
|
|
MFG Part No#:
7989528
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Powerpoint Hoist Ring, 180 Pivot, 55
Ring connection for hook assemblies. Double ball-bearings is the optimal solution for turning and flipping operations under full load. Lifting points rotates 360 degrees. Large distance between bolt-on surface and load to avoid damage. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Suspension ring with enlarged pivoting area. Available in Metric and UNC thread. Maximum operation temperature range WITHOUT reduction of WLL-40 to 200 Celsius. Maximum operation temperature WITH reduction of WLL up to 400 degrees Celsius.
|
|
|
|
MFG Part No#:
7989081
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD 6.3 Ton, M24, Pivot, Swivel Load Rin
Lifting points rotates 360 degrees. Pivoting 180 degrees. Unique RUD spring mechanism. Swivel joint in the lifting ring axis. Round lifting ring (no kinking possible). Rotating combination head with RUD ICE-Bolt. Wear indicators. Unsymmetrical application of force. Available in Metric or UNC thread. Maximum operation temperature range WITHOUT reduction of WLL -40 to 100 degree Celsius. MAximum operation temperature WITH reduction of WLL 350 degree Celsius.
|
|
|
|
MFG Part No#:
7909318
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Excavator Hook, 5500 lb. Load Capaci
The threaded hook for all lifting means. Robust, forged safety hook. Assembly with flat/ring wrench or allen key possible. Area of application in hook plane: 150 degrees. Areas of application at lateral load: +45, -45 degrees. Maximum operation temperature range WITHOUT reduction of WLL -40 to 100 degree Celsius. Maximum operation temperature WITH reduction of WLL to 350 degree Celsius.
|
|
|
|
MFG Part No#:
7991206
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
CM Weblok Assembly 877010-2 Synthetic to
CM Weblok Assembly 877010-2 Synthetic to Synthetic 3/8" 5000 Lbs CapacityWhen working with synthetic slings, CM Weblok assemblies allow for quick, easy and safe sling attachment. CM Webloks are available in two designs. Synthetic-to-attachment Webloks combine our industry-leading CM Hammerlok coupling link with a CM synthetic sling attachment. Synthetic-to-synthetic Webloks feature two synthetic sling attachments. CM Webloks are available with either single or double load pin retention, depending on your application. For use with round slings, web slings and high-performance synthetics. Simply connect a sling to the synthetic sling attachment of the Weblok and a master link or other rigging attachment to the Hammerlok portion to efficiently and safely lift your load. For synthetic-to-synthetic Webloks, simply attach a sling to both ends. Forged rigging products are better than cast rigging products. When compared, forged parts feature greater ductility, better fatigue life, higher tensile strength and have a finer grain structure. This combination of enhanced features allows for lighter, better performing products with a lower risk of internal defects. Synthetic sling attachment portions of the CM Weblok feature the widely recognized CM orange powder coated finish, providing an extra-smooth surface for synthetic attachments. Buy with confidence knowing your product is safe to operate and meets industry-recognized overhead lifting standards.Available with either single or double retention. Webloks with double retention feature a load pin retention system that incorporates a bolt head and lock nut to prevent the load pin from backing out during extreme use - delivering the highest level of safety on the market. For less severe applications, single-retention Webloks use the same retention system as CM's legendary Hammerlok.
|
|
|
|
MFG Part No#:
877010-2
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Excavator Hook, 3300 lb. Load Capaci
The threaded hook for all lifting means. Robust, forged safety hook. Assembly with flat/ring wrench or allen key possible. Area of application in hook plane: 150 degrees. Areas of application at lateral load: +45, -45 degrees. Maximum operation temperature range WITHOUT reduction of WLL -40 to 100 degree Celsius. Maximum operation temperature WITH reduction of WLL to 350 degree Celsius.
|
|
|
|
MFG Part No#:
7991205
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD PowerPoint Hoist Ring, 180 Pivot, 55
Universal hook connection for ring assemblies, round slings, wire ropes, hook assemblies. Double ball-bearings is the optimal solution for turning and flipping operations under full load. Lifting points rotates 360 degrees. Large distance between bolt-on surface and load to avoid damage. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Suspension ring with enlarged pivoting area. Available in Metric and UNC thread. Maximum operation temperature range WITHOUT reduction of WLL-40 to 200 Celsius. Maximum operation temperature WITH reduction of WLL up to 400 degrees Celsius.
|
|
|
|
MFG Part No#:
7989909
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Hoist Ring, 180 Pivot, 35, 270 lb. L
Split force introduction due to multiple point fixing. Suspension ring pivots 180 degrees. 100 percent WLL at 90 degree in the load ring place possible. Clamping spring works as a noise reduction and holds the octagon-suspension ring in the requested position. Clear marking of the minimum WLL for all loading directions. The weld-on block is made out of a quality weldable steel. Simple and fast welding installation. Maximum operation temperature range WITHOUT reduction of WLL -40 to 200 degree Celsius. Maximum operation temperature WITH reduction of WLL 400 degree Celsius.
|
|
|
|
MFG Part No#:
7992491
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
RUD Powerpoint Hoist Ring, 180 Pivot, 55
Universal hook connection for ring assemblies, round slings, wire ropes, hook assemblies. Double ball-bearings is the optimal solution for turning and flipping operations under full load. Lifting points rotates 360 degrees. Large distance between bolt-on surface and load to avoid damage. Rotatable at nominal WLL, 90 degree to the bolt-on direction. Suspension ring with enlarged pivoting area. Available in Metric and UNC thread. Maximum operation temperature range WITHOUT reduction of WLL-40 to 200 Celsius. Maximum operation temperature WITH reduction of WLL up to 400 degrees Celsius.
|
|
|
|
MFG Part No#:
7989910
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
|
|
|